Select Page

Builder Extreme 1500 HC

A large scale 3D printer with a heated chamber to print ASA, PET-G, ABS and more

Builder Extreme 1500 HC

Builder Extreme 1500HC, how it differentiates from the other models  is it has more variety of materials versus the ones below which only have PLA for rapid prototyping and Tough PLA for more functional parts. You are probably asking why 4 different  models if they print all the same material. The thing that  differentiates each model  is the size of the print table.

Build volumePrint technology
1100x500x820 mm (XYZ)FFF (Fused Filament Fabrication)
Print headNozzle diameter
Mono print head (3 nozzle diameters included)0.4 standard, 0.8 and 1.2 mm are included
Print speedHeated Chamber
Up to 200 mm/sUp to 70 degrees Celsius
Layer height resolutionFilament detection
0.4 mm nozzle – 0.2 – 0.3 mm
0.6 mm nozzle – 0.2 – 0.5 mm
0.8 mm nozzle – 0.3 – 0.7 mm
Yes
Travel speedUPS system
Up to 300 mm/sPossibility to resume print after power failure
DisplayConnectivity
7-inch full colour touchscreenUSB, Wi-Fi, Ethernet
Safety locking systemCE  and UL certified
Doors open only after print is pausedYes
Machine dimensionsShipping dimensions
1670x980x1820 mm (LxWxH)available soon
Weight 
290 kg 

 

Supplied softwareSupported
 Simplify3DMac, Windows

 

PLA ABS
1.75 mm 1.75 mm
PET-G ASA and more
1.75 mm 1.75 mm
Nylon Nylon CF15
1.75 mm 1.75 mm

Builder Extreme 1500 HC

The New 1500 HC will be able to print ABS,PLA, PETG, Nylon, Nylon combined with chopped carbon fiber, Polycarbonate and ASA which is UV resistant material. The print table will be the same size as the Extreme 1500, however the HC will have more materials to offer because it has the ability to heat the print table to higher heat temperature in order to print these different materials.