Select Page



The Perfect Finish

Complete your Formlabs 3D printing workflows with the perfect complimentary machines. Everything you need to simplify and automate your SLA resin 3D print post-processing.

Form Wash

Every SLA print needs a good cleaning. Go glove-less and automate your print processing with the Form Wash.

Take 3D prints straight from your Form 3 or Form 2 to the Form Wash. Keep your hands clean and put the whole build plate in with your piece then sit back, relax, and let the Form Wash get to work cleaning every nook and cranny. Once washing completes, your Form Wash automatically lifts 3D prints to air dry, ready to go when you are.

Check the Specs

  Form Cure

Bring out the true strength of your resin 3D prints. Streamline the curing process for all your SLA projects.

The Form Cure is engineered to make sure your SLA prints achieve their maximum mechanical properties. An advanced heating system precisely controls curing temperatures up to 80 °C and a rotating turntable provides uniform exposure during the curing process. Once done, your parts are fully cured and ready for action.

Check the Specs

Form Cure L

Effortlessly and safely cure your large-scale SLA 3D prints to give them greater strength for peak performance with the Form CureL.

Curing your SLA prints ensures that they reach their best mechanical performance. The Form Cure L uses two 500W heaters, high-powered UV lights alongside a reflective inner chamber, and a rotating turntable to guarantee a consistent, high-intensity cure from all angles. Whether it’s for your large prints or high-volume small part production, the Form Cure L can be used with all Formlabs SLA 3D printers.

Check the Specs

    Form Wash L

Easily post-process your large scale or high-volume SLA 3D prints with the massive Form Wash L.

All SLA prints need a decent bath to remove excess resin before they’re cured. The Form Wash L automates this process, leaving you with smooth, clean, high-quality parts (and clean hands!) every time. Once the washing cycle finishes, your prints are automatically lifted out of the solvent to air dry, so you don’t have to worry about timers or over-soaking your prints ever again. The Form Wash L is even compatible with all your favorite Formlabs SLA 3D printers!

Check the Specs

Fuse Sift

Get the most out of your Fuse 1 printing materials and complete your printing process with the Fuse Sift, a convenient, compact, and efficient all-in-one powder recovery station.

Complete your Fuse 1 workflow and bring your printing process full circle with an all-in-one powder recovery and recycling station, the Fuse Sift. Combine your part extraction, powder recovery, storage, and mixing processes into a single, free-standing device. Reduce your printer’s downtime by easily moving build chambers and powder cartridges between your Fuse 1 and Fuse Sift.

Check the Specs

Get In Touch With Us

  • This field is for validation purposes and should be left unchanged.