Webshop
-
$63,751,150,423.00 Add to cart3DConnexion Accessories
SpaceMouse
From:149*A study supports ergonomic advantages. The term "mouse arm" or "RSI syndrome" refers to the discomfort and functional limitations that might occur when a mouse is used vigorously and repeatedly. These symptoms may be avoided by using a 3D mouse, which will also significantly improve the productivity and health of your CAD process.Learn More -
$63,751,150,423.00 Add to cart
3DConnexion Accessories
CadMouse
From:119*The highly regarded purpose-built series known as CadMouse was created with design and engineering experts in mind. It delivers outstanding comfort and silent operation thanks to its perfect calibration and enhanced ergonomics.Learn More -
$63,751,150,423.00 Add to cart
3DConnexion Accessories
Keyboard
From:99*You can build digital 3D models and expert designs with the 3Dconnexion Keyboard Pro's detachable Numpad. Because of its narrow width, you may place your mouse or pen better, leading to a more relaxed and natural posture.Learn More -
$63,751,150,423.00 Add to cart
Partner Solutions
3DConnexion
Simple to use and intuitive, designing your products has never been easier or more enjoyable than with a mouse designed to work with you and your daily 3D workflows.Learn More -
$36.00 Select options
Hyper Speed ABS
One of the specifically created filaments from the High-speed filament range for FFF printing is the Hyper Speed ABS Filament. High-speed printing can result in nozzle blockage and subpar layer bonding because the filament is passed into the heat block quickly and has little time to dissolve from a solid to a molten state. Additionally, during high-speed printing without a heated room, ABS can experience warpage and delamination of the produced component. Download DatasheetLearn More -
$36.00 Select options
Hyper Speed PLA
One of the specifically created filaments from the High-speed filament range for FFF printing is the Hyper Speed PLA filament. High-speed printing can result in nozzle blockage and subpar bonding between layers because the filament is passed into the heat block quickly and the polymer has little time to transition from a solid to a molten state. Download DatasheetLearn More -
$80.00 Select options
Premium TPU-95A
Thermoplastic polyurethane, or TPU, is a kind of elastic and pliable 3D printer material. It is ideal for applications needing impact absorption and a soft-touch surface due to its rubber-like elasticity, resilience, and sturdiness. Tubes, seals, bushings, and sound dampeners are a few examples of TPU 3D-manufactured components. Download DatasheetLearn More -
$60.00 Select options
P-filament 721
Polypropylene, also known as PP, is a polymer that can be used to create objects in three dimensions. PP thread is strong, unbreakable, fatigue-resistant, and bendable to a certain extent. PP parts that are 3D printed are excellent for applications that call for twisting, stretching, or bending. Due to its lightweight and minimal friction properties, PP is also a contact-safe substance for use in food, chemical, and medicinal uses, including orthopedic use. Download DatasheetLearn More -
$49.99 Select options
Premium PC
A robust thermoplastic 3D printer material known as PC (Polycarbonate) is distinguished by its superior impact resistance, high rigidity, heat resistance, and flame retardant characteristics. As a result, PC filament can withstand high temps and fires while maintaining stability, absorbing pressure, and preventing deformation or fractures. PC functions well in high-temperature settings, such as under a car's hood, thanks to its 110°C heat protection. PC is frequently used for manufacturing, function testing, completed components assembly, and manufacturing because of its impact power. Download DatasheetLearn More -
$84.99 Select options
Alloy 910
Due to its exceptional mechanical performance with excellent toughness, strength, and impact resistance, nylon or PA (Polyamide) is an extensively used engineering and industrial material. It is suitable for instruments, functional pieces, and end-use components. Additionally, its low coefficient of friction makes it perfect for moving components and ergonomic instruments. Download DatasheetLearn More -
$69.99 Select options
Industrial PET GF
Raise3D Commercial PET GF is a PET-based glass fibre-reinforced polymer thread. (Polyethylene terephthalate). Glass fibers that are evenly distributed improve the stiffness, strength, thermal resistance, and chemical resistance of the PET matrix. With a tensile stiffness and strength of over 4.1 GPa and 70 MPa, respectively, PET GF after heating stabilizes its heat resistance at about 120 °C. Download DatasheetLearn More -
$219.99 Select options
Industrial PPA GF
Raise3D Commercial PPA GF, also known as high-performance/high-temperature Nylon, is a polyphthalamide-based polymer filament substance with glass fiber reinforcement. PPA has a higher melting point, glass transition temps (Tg), reduced moisture absorption, and better dimensional stability than aliphatic polyamides (such as PA6). The properties of the PPA matrix are further enhanced by the addition of short glass fibers (15wt.%), making PPA GF printed components hopeful for end-use uses in the automotive, aircraft, and electrical and electronics (E&E) industries. Download DatasheetLearn More -
$79.99 Select options
Industrial PET CF
A carbon fiber-reinforced polymer material based on PET is called Raise3D Industrial PET CF. (Polyethylene terephthalate). The rigidity, strength, heat, and chemical resilience of the PET material are improved by evenly distributed 15-weight percent carbon fibers. After cooling, PET CF achieves a tensile stiffness and strength of more than 6 GPa and 80 MPa, respectively, and stabilizes its heat resistance at a temperature of about 150 oC. Due to its superior printability, dimensional stability, high creep resistance, and low moisture absorption compared to carbon fiber-reinforced Nylon filament, PET CF is the best material to use when printing carbon fiber composites for durable and economical end uses, such as jigs, fixtures, and functional parts. Download DatasheetLearn More -
$239.99 Select options
Industrial PPA CF
The carbon fiber-reinforced composite filament substance Raise3D Industrial PPA CF Filament is built on PPA (polyphthalamide, also known as high-performance/high-temperature Nylon). This hybrid thread has better mechanical and thermal characteristics than other Nylon strands because of its high-performance Nylon matrix. The PPA CF has reduced density, lower moisture absorption, high strength and stiffness, high wear and creep resistance, and good chemical and heat resistance thanks to well-controlled dispersion and length distribution of chopped carbon fibers (15 wt%). For end-use uses in the automotive, aerospace, electrical, and electronics (E&E) industries, it is hopeful. Download DatasheetLearn More -
$195.99 Select options
Industrial PA12 CF+
Industrial polymer made from biomaterials called PLA (Polylactide) is completely biodegradable and non-toxic. One of the most user-friendly 3D printing filaments on the market, it is noteworthy for being simple to use, long-lasting, and reasonably powerful. It is the material that is most frequently suggested for those who are fresh to 3D printing a result. The simplicity of use also makes it perfect for producing 3D-printed components for design, testing, and jigs and fittings. Download DatasheetLearn More -
$34.99 Select options
Premium PLA
Industrial polymer made from biomaterials called PLA (Polylactide) is completely biodegradable and non-toxic. One of the most user-friendly 3D printing filaments on the market, it is noteworthy for being simple to use, long-lasting, and reasonably powerful. It is the material that is most frequently suggested for those who are fresh to 3D printing a result. The simplicity of use also makes it perfect for producing 3D-printed components for design, testing, and jigs and fittings. Download DatasheetLearn More
 
